Error Monitor - Fujitsu UTB-GCA Operating Manual

If the and the number for the central control number
error at the relevant remote control group. Start the error monitor, identify the error and remove the
cause.
ACL
CLOCK
ADJUST
DAY
TIMER
MODE
TIMER DAY OFF
COPY

7-1. ERROR MONITOR

When the error monitor is started, the following can be performed.
• The error code for each remote control group (indoor units) is displayed.
• Up to two of the past error codes are displayed for each of the indoor units, the outdoor units and
the central remote controller group.
Press
CHECK
The LCD changes to the error monitor screen.
Press
number for which its details of the error contents
are to be confirmed. (The number of the
ing the error is flashing.)
Press
code.
Each press of
below.
Current error code → First previous error code → Second previous error code
74
TIME
TIMER MEMORY CENTRAL
DELETE OPERATION CONTROL
TIMER MEMORY GROUP
SETTING SETTING
SET
CHECK
to start the error monitor.
to select the central control
to select the display mode for the error
will switch the display as shown
flash during operation, there is an
ENERGY
BACK ZONE
SAVE
SET
FILTER
ON OFF
RESET
DELETE
TEST
caus-
MASTER
CONTROL
FAN
TEMP .
ANTI
CONTROL
FREEZE