Using The Day Off Setting - Fujitsu UTB-GCA Operating Manual

TIMER
Press
COPY
The time setting of the selected day is copied, and
starts flashing. (The copied time settings are
saved to the memory.)
DAY
Press
the copied time settings.
TIMER
Press
COPY
The copied time settings are pasted down and the
comes on in the day selected in 4. If you want
to copy the settings current, repeat the operations
shown in 4 and 5.
Repeating the operations shown in steps 3 to 5, you
can copy the time setting you want and paste it to
the day you want to set.
Notes
• The WEEKLY1, WEEKLY2 timer settings that have been set for other days can be pasted to another day
by using the copy / paste function.
• In the one week setting for the weekly timer, if even a single day setting overlaps into the next day, this
function cannot be used.
6-3-6.

Using the day OFF setting

• Use the DAY OFF setting to switch off timed operation for a selected day in the coming week.
• This is a temporary, one time setting. The DAY OFF setting is automatically cleared as soon as the
specified day passes.
Carry out steps 1 to 3 of the "Setting up the weekly
timer operation" procedure.
68
.
to select the day that you want to paste
again.