Change Form Feed Time; Feed Paper; Compensate Burn Time - Fujitsu FTP604 User Manual

[Description]

3.8.37 Change form feed time

[Name]
[Format]
[Description]

3.8.38 Feed Paper

[Name]
[Format]
[Range]
[Description]

3.8.39 Compensate Burn time

[Name]
[Format]
[Range]
[Description]
12-02-2003
Page 3-29 of
51
Decimal
N represents the new baud rate, legal values
for n = 1 to 255. The baud rate is calculated
as 921600/n = new baud rate.
For instance 921600/8 = 115200baud.
The value is saved to the flash
Change form feed time
ASCII
Hex
Decimal
N represents the time between that the
board registry incoming paper, and to it
starts feed the auto form feed length. The
time is calculated as n * 50msec. The default
setting is 2 seconds. The value is saved to
flash. Legal values for n are between 1 and
255.
Feed Paper
ASCII GS n
Hex 1D
Decimal 29
n: [-128;127]
When the printer controller receives this command the
paper will be fed n-dot lines. If the value is negative a
reverse form feed will be made.
Compensate burn time
ASCII RS n
Hex 1E
Decimal 30
n: [-15;15]
When the printer controller receives this command the
burn time will be compensated. If a negative value is
send the printout intensity will be lighter and if a positive
value is send the printout intensity will be darker.
27 104 n
ESC i n
1B 69 n
27 105 n
n
n
n
n
- 3-29 -