To Select Horizontal Airflow Swing Operation - Fujitsu UTB-GCA Operating Manual

5-8-3.

To select horizontal airflow swing operation

ACL
CLOCK
ADJUST
DAY
TIMER
MODE
TIMER DAY OFF
COPY
Enter the control mode to select the central control
number (the indoor units) whose horizontal airflow
is desired to swing automatically.
Refer to "3-3. CONTROL MODE" for information
about control modes.
Press
shown in the display will change to the
this mode, the right / left air direction flaps will swing
automatically to direct the airflow to both the right
and the left.
It is necessary to transmit the newly set information
to the relevant indoor units. Refer to steps 4, 5 and
notes of "3-3. CONTROL MODE" for details.
48
TIME
TIMER MEMORY CENTRAL
DELETE OPERATION CONTROL
TIMER MEMORY GROUP
SETTING SETTING
SET
CHECK
for 2 seconds or more and the
ENERGY
BACK ZONE
SAVE
SET
FILTER
ON OFF
RESET
DELETE
TEST
. In
MASTER
CONTROL
FAN
TEMP .
ANTI
CONTROL
FREEZE