Zone Setting; To Start Zone Operation - Fujitsu UTB-GCA Operating Manual

4-4. ZONE SETTING

When the ZONE button is pressed, the actual operation condition (ON or OFF) of the selected
indoor units is determined by the set position of the DIP switch in the indoor unit.
4-4-1.

To start zone operation

ACL
CLOCK
ADJUST
DAY
TIMER
MODE
TIMER DAY OFF
COPY
Enter the control mode to select the central control
group (the indoor units) whose zone operation is to
be performed.
Refer to "3-3. CONTROL MODE" for details about
control modes.
Press
ZONE
It is necessary to transmit the newly set information
to the relevant indoor units. Refer to steps 4, 5 and
notes of "3-3. CONTROL MODE" for details.
28
TIME
TIMER MEMORY CENTRAL
CONTROL
DELETE OPERATION
TIMER MEMORY GROUP
SET SETTING SETTING
CHECK
. will appear.
ENERGY
BACK ZONE
SAVE
SET
FILTER
ON OFF
RESET
DELETE
TEST
MASTER
CONTROL
FAN
TEMP .
ANTI
CONTROL
FREEZE