Notes
• A flashing time value indicates that the system is in time-setting mode.
• You do not need to set values for both WEEKLY1 and WEEKLY2. If you wish, you can set values only for
WEEKLY1 or only for WEEKLY2.
• The allowable range for the day's time setting is shown below.
Previous day's
WEEKLY setting
• If the set OFF time goes into the subsequent day, the [
10min
Available range
WEEKLY ON time
WEEKLY OFF time
10min
0.00
10min
Next day's
WEEKLY setting
10min
0.00
] caption appears on the display.
63