Page 1
CENTRAL REMOTE CONTROLLER INSTALLATION MANUAL For authorized service personnel only. INSTALLATIONSANLEITUNG Nur für autorisiertes Fachpersonal. MANUEL D'INSTALLATION UTY-DMMYM Pour le personnel agréé uniquement. UTY-DMMGM UTY-DMMXM MANUAL DE INSTALACIÓN Sólo para personal de mantenimiento autorizado. MANUALE DI INSTALLAZIONE Esclusivamente destinato al personale autorizzato.
INSTALLATION MANUAL This mark indicates procedures which, if improperly CAUTION PART NO. 9380222019-02 performed, might possibly result in personal harm CENTRAL REMOTE CONTROLLER to the user or damage to property. • Pay abundant care when transporting this unit because it is a precision Contents device.
33.5 5.2. Wiring WARNING • Before starting installation work, turn off the power of the connection destination. Do not turn on the power again until installation is completed. Otherwise, it will cause electric shock or fire. • Use the accessories or specified connection cables. Do not modify connection cables other than those specified, do not use extension cords, and do not use independent branch wiring.
Example) (2) Insert the flat-blade screwdriver and remove the front case and rear case by twisting it slightly. Wiring diagram when 3 units of branch boxes are connected Hooks (2 places) Rear case Branch box Branch box Branch box (Primary) (Secondary 1) (Secondary 2) REMOTE...
5.4. Setting the DIP switch CAUTION 1. 12V (Red) • Install the remote controller cables so as not to be direct touched with your hand. 2. Signal (White) • Do not touch the remote controller PC board and PC board parts directly with your hands.