Weekly Timer; Setting Up The Weekly Timer Operation - Fujitsu UTB-GCA Operating Manual

6-3. WEEKLY TIMER

Weekly timer features
• Set different operating times for each day of the week.
• Set one or two operating spans (one or two pair(s) of ON / OFF times) per day.
• Set time to a resolution of 10 minutes.
• OFF time can be carried over to the subsequent day.
• Use the "DAY OFF" setting to cancel operation for any day of the coming week (one time cancel-
lation).
• Copy and paste can be used for time setting for each day.
6-3-1.

Setting up the weekly timer operation

CLOCK
ADJUST
TIMER
MODE
TIMER
COPY
Enter the control mode to select the central control
number (the indoor units) to be set.
Refer to "3-3. CONTROL MODE" for information
about control modes.
TIMER
Press
MODE
appear on the display.
The display now shows the current day (by DAY of
the week), the first ON and OFF times for the day
(the "WEEKLY1" times).
The top time value gives the on time and the bottom
one gives the off time.
If either time has not been set, the corresponding
time "– – : – –" will show on the display.
60
ACL
DAY TIME
TIMER MEMORY CENTRAL
DELETE OPERATION CONTROL
DAY OFF TIMER MEMORY GROUP
SET SETTING SETTING
until the segments of the
ENERGY
BACK
ZONE
SAVE
SET
FILTER
ON OFF
RESET
DELETE
CHECK TEST
,
MASTER
CONTROL
FAN
TEMP .
ANTI
CONTROL
FREEZE