To Stop Operation - Fujitsu UTB-GCA Operating Manual

5-2-2.

To stop operation

Enter the control mode to select the central control
number (the indoor units) to stop its operation.
Refer to "3-3. CONTROL MODE" for information
about control modes.
ON OFF
Press and will light up. The setting is
applied to the indoor units associated with the se-
lected central control number. Because of the
change of the setting, LED SET will come on.
It is necessary to transmit the newly set information
to the relevant indoor units. Refer to steps 4, 5 and
notes of "3-3. CONTROL MODE" for details.
34