Filter Indicator Reset - Fujitsu UTB-GCA Operating Manual

4-5. FILTER INDICATOR RESET

The filter indicator flashes when the filter needs to be cleaned or exchanged.
ACL
CLOCK
ADJUST
DAY
TIMER
MODE
TIMER DAY OFF
COPY
When the working time of the filter reached the set time, the indicator
associated with the indoor unit will flash in order to inform you that the filter needs to be cleaned or
exchanged.
• Operation display mode /
Individual control mode ...........
• Group control mode .................
• All control mode .......................
After the filter has been cleaned, or exchanged please reset the filter indicator by:
FILTER
RESET
Press
light up.
Press SET
lected indoor units, when the signal transmission.
Transmission is made.
Note
Since there is a need to enable the filter indicator function, please consult your sales representative.
30
TIME
TIMER MEMORY CENTRAL
DELETE OPERATION CONTROL
TIMER MEMORY GROUP
SETTING SETTING
SET
displayed remote control group needs to be cleaned or
exchanged.
currently displayed needs to be cleaned or exchanged.
needs to be cleaned or exchanged.
.
will stop flashing and LED
to send the filter reset signal to se-
ENERGY
BACK ZONE
SAVE
SET
FILTER
ON OFF
RESET
DELETE
CHECK TEST
will flash if the filter of an indoor unit in the currently
will flash if the filter of any indoor unit in the group
will flash if the filter of any indoor unit in the system
SET will
and will go out.
MASTER
CONTROL
FAN
TEMP .
ANTI
CONTROL
FREEZE
and cursor