Features - Fujitsu UTB-GCA Operating Manual

2-2. FEATURES

The front panel of the remote controller can be divided by function into three different control areas.
CENTRAL CONTROL
The central control provides management of indoor units. This includes placing restrictions on the standard
remote controllers or performing memory operations.
If multiple remote control
groups are set as one
group,the control of these
remote control groups can be
realized by simply choosing the
group.
4-1. GROUP INFORMATION STORE
TIMER AREA
ACL
CLOCK
ADJUST
DAY
TIMER
MODE
TIMER DAY OFF
COPY
TIMER CONTROL
This function is used to provide time-related
controls, such as start and stop, of the indoor unit
by presetting the timer.
SUN
SAT MON
FRI TUE
THU WED
Weekly timer is equipped as standard
function. (Up to 2 times ON/OFF per day
for one week).
6-3. WEEKLY TIMER
Other basic functions
Notes:
• Central remote controller can control the indoor unit by all / group / individual.
• UP to 400 indoor units or 64 group can be controlled with one central remote controller.
• UP to 16 central remote controllers can be connected in one system.
6
By setting the central remote controller,
it is possible to lock the function of the
standard controllers. Items of selections
to lock are all functions, timer mode,
operating mode, temperature setting,
reset filter, and ON/OFF.
4-2. STANDARD REMOTE CONTROL
OPERATION PROHIBIT SETTING
CENTRAL CONTROL AREA
TIME
TIMER MEMORY CENTRAL
CONTROL
DELETE OPERATION
SET
TIMER MEMORY GROUP
SETTING SETTING
SET
CHECK
8
7
6
5
4
3
2
Setting contents of central remote
controller are all memorized, so
that each indoor unit can be
operated in the memorized
condition even if the operating
conditions are changed later on.
4-3. MEMORY OPERATION
OPERATION AREA
TEMP .
ENERGY
BACK ZONE
SAVE
FILTER
ON OFF
RESET
DELETE
TEST
OPERATION CONTROL
This function provides a controlled operation(such
as to stop operation)of the indoor units in the
same manner as the standard remote controller.
When the temperature of the room becomes low,the
indoor unit will automatically start the heating operation
until the temperature increases to a preset temperature.
5-10. ANTI FREEZE OPERATION
MASTER
CONTROL
FAN
ANTI
CONTROL
FREEZE