Fujitsu UTB-GCA Operating Manual page 63

TIMER
Press
SET
The setting of the "WEEKLY1" timer is completed
and it automatically switches to the "WEEKLY2" set-
ting. The "WEEKLY2" on time starts flashing.
Repeat the operations described in steps 6 to 9 to
set the "WEEKLY2" ON and OFF time.
After setting the "WEEKLY2" OFF time, press the
TIMER
to store the "WEEKLY2" OFF time. At the
SET
moment, the setting of "WEEKLY2" is also com-
pleted. You will be brought back to the step 4. You
can review your setting by pressing
moves you to the next setting, as follow.
WEEKLY1 → WEEKLY2
ON / OFF
DAY
Press
procedures are to repeat steps 5 to 10 mentioned
above.
When you have finished setting all of the time, hold
down the
62
to store the "WEEKLY1" off time.
ON / OFF
to select another day for set up. The
TIMER
for 2 seconds.
SET
TIME
. Each press