Allen-Bradley MicroLogix 1400 Instruction Manual page 660

efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
658 Knowledgebase Quick Starts
Publication 1766-RM001A-EN-P - October 2008
DISCONNECTING MODEM
1. 1. Ensure the DLG Utility has been shutdown.
2. 2.Start HyperTerminal (Do not re-connect)
3. 3.Open the previously configured "Datalog "
4. Type "+++" to place modem in command mode,
Do not press the ENTER KEY!
Your modem will respond: OK
5. Type "ATH "
6. Press Enter. This will send the disconnect command to modem.