Allen-Bradley MicroLogix 1400 Instruction Manual page 630

Programmable controllers
Hide thumbs Also See for MicroLogix 1400:
Table of Contents

Advertisement

efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
628
Protocol Configuration
Ethernet Configuration Parameters
Parameter
Options
Port Setting
Auto Negotiate is enabled
10/100Mbps Full Duplex/Half Duplex,
100 Mbps Full or 100 Mbps Half Duplex,
100 Mbps Full Duplex or 10 Mbps Full Duplex,
100 Mbps Half Duplex or 10 Mbps Full Duplex,
100 Mbps Full Duplex,
100 Mbps Half Duplex,
10 Mbps Full Duplex,
10 Mbps Half Duplex Only
Auto Negotiate is disabled
100 Mbps Full Duplex Forced,
100 Mbps Half Duplex Forced,
10 Mbps Full Duplex Forced,
10 Mbps Half Duplex Forced
Select the port setting from the drop down list. The selections will vary depending on whether you
are online or offline, and whether Auto Negotiation is enabled or disabled.
Msg
250...65,500 ms.
Connection
Timeout (x
The number of milliseconds allowed for a MSG instruction to establish a connection with the
1ms)
destination node.
Msg Reply
250...65,500 ms.
Timeout (x
ms)
The number of milliseconds the Ethernet interface waits for a reply from a command it initiated
(through a MSG instruction).
Inactivity
The amount of time (in minutes) that a MSG connection may remain inactive before it is terminated.
Timeout
The Inactivity Timeout has a 1 minute resolution and a range from 1...65,500 minutes.
Contact
The Contact string which is specified by the SNMP client. The maximum length is 63 characters.
Location
The Location string which is specified by the SNMP client. The maximum length is 63 characters.
Publication 1766-RM001A-EN-P - October 2008
Programming
Software Default
10/100Mbps Full
Duplex/Half
Duplex
15000
3000
30 minutes.
Null
Null

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents