Configure Expansion - Allen-Bradley MicroLogix 1400 Instruction Manual

efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive

Configure Expansion

I/O Using RSLogix 500/
RSLogix Micro
Expansion I/O must be configured for use with the controller. Configuring
expansion I/O can be done either manually, or automatically. Using
RSLogix 500/RSLogix Micro:
1. Open the Controller folder.
2. Open the I/O Configuration folder.
3. For manual configuration, drag the Compact I/O module to the slot.
For automatic configuration, you must have the controller connected
online to the computer (either directly or over a network). Click the
Read I/O Config button on the I/O configuration screen. RSLogix
500/RSLogix Micro will read the existing configuration of the
controller's I/O.
Some I/O modules support or require configuration. To configure a
specific module, double-click on the module, an I/O configuration screen
will open that is specific to the module.
I/O Configuration
Publication 1766-RM001A-EN-P - October 2008
37