H y d r a u l i c H o s e R e p l a c e m e n t
H y d r a u l i c H o s e a n d H o s e B a r b P r e p a r a t i o n
A new Reverb™ hose kit with a hose barb must be assembled.
A new Reverb hose kit with Connectamajig™ does not require assembly.
Reverb Hydraulic Hose kit with Connectamajig: Proceed to
Reverb Stealth Hose Removal and
Install the barb sleeve onto the hose.
1
Install the o-ring onto the barb.
2
Thread the barb into the hose and barb sleeve until it stops.
Tighten the hose barb and barb sleeve.
3
Reverb Stealth: Proceed to
Reverb: Proceed to
Reverb Hose Removal and
Installation.
Reverb Stealth Hose Removal and
Installation.
Hose with Hose Barb
7 mm
Installation.
Hose with Connectamajig
7 mm or T10 TORX®
1.1-2.2 N•m (10-20 in-lb)
Hydraulic Hose Replacement
11