5 0 / 2 0 0 H o u r S e r v i c e
Install and orient the remote on the handlebar with the bleed port level,
1
or at the highest point.
Set the speed adjuster to the full slow position.
2
Rotating the speed adjuster to the slowest setting is critical for a
successful bleed. Failure to do so may result in insufficient fluid
volume inside the hydraulic remote system.
Turn the speed adjuster in the opposite direction of the arrow (counter-
clockwise) until it stops.
R e m o t e P r e p a r a t i o n
T25 TORX®
Standard Remote
Reverb™ 1x™ Remote
Standard Remote
T25 TORX
Reverb 1x Remote
Remote Preparation
24