SRAM RockShox Reverb Stealth Manual page 19

Hold the hydraulic hose near the hose barb. Rotate the Reverb™ remote
4
lever counterclockwise and unthread the hose from the remote hose
barb.
Discard the hose.
Install the new hose barb and hose, and tighten to.
5
Secure the hose to the frame.
6
Needle nose pliers
7 mm
Reverb™ Hose Removal and Installation
3.4-4.5 N•m (30-40 in-lb)
19