SRAM RockShox Reverb Stealth Manual page 13

Hose Barb: Remove the hose barb.
4
Connectamajig™ Hose Coupler: Remove the hose coupler.
Use a rag to wipe away any fluid.
Cut the hydraulic hose.
5
Use a rag to collect any fluid that may drip.
Thread the Reverb™ Stealth Barb Connector tool, reverse threaded end
6
first, into the hose.
10 mm 7 mm
9 mm 6 mm
Hydraulic Hose Cutter Hose Barb
Reverb Stealth Barb Connector Tool
Reverb™ Stealth Hose Removal and Installation
Hose Barb
Connectamajig Hose Coupler
Hydraulic Hose Cutter Connectamajig
Small Hex Wrench
13