Table of Contents
Advertisement
5 0 / 2 0 0 H o u r S e r v i c e
S a d d l e , R e m o t e , a n d B r a k e I n s t a l l a t i o n
Install the saddle clamps and saddle, and tighten the bolts.
1
4 mm
8-10 N•m (70-89 in-lb)
Install each brake lever and caliper according to the brake
2
manufacturer's recommended procedures.
Reverb™ 1x™ Remote: Adjust the brake and remote to the desired
position and tighten the clamp bolt.
The Reverb 1x remote can be attached to the handlebar with the
included discrete clamp if the brake lever is not compatible with
SRAM® MatchMaker™ X.
T25 TORX®
3.0-4.0 N•m (35-44 in-lb)
Reverb 1x Remote
Standard Remote: Install the remote in the desired position and tighten
3
the clamp bolt.
T25 TORX
2.8-3.4 N•m (25-30 in-lb)
Standard
Saddle, Remote, and Brake Installation
35
Hide quick links:
Advertisement
Table of Contents
