Reverb Stealth Installation - SRAM RockShox Reverb Stealth Manual

2 0 0 H o u r S e r v i c e R e v e r b S t e a l t h I n s t a l l a t i o n
Cut the cable tie and remove the seatpost from the rear wheel.
1
Apply friction paste to the seatpost.
Install the seatpost and pull the hydraulic hose through the frame.
⚠ WARNI NG
Failure to use friction paste could allow the seatpost to slip during use,
which could lead to serious injury and/or death.
Hose Port - Seat Tube
Hose Port - Head Tube
Set the seatpost to the desired ride height in the bicycle and tighten
2
the seatpost collar to the frame manufacturer's recommended torque,
but do not exceed 6.7 N•m (59 in-lb).
NOTI CE
If the seatpost collar torque exceeds 6.7 N•m (59 in-lb), the seatpost
will not function properly.
≤ 6.7 N•m (59 in-lb)
Secure the hose to the frame.
3

Reverb Stealth Installation

34