Hose barb: Install the hose barb into the seatpost and tighten.
9
10 mm
3.4-4.5 N•m (30-40 in-lb)
7 mm
Connectamajig™ Hose Coupler: Install the hose coupler into the
coupler and tighten.
9 mm
1.1-2.9 N•m (10-26 in-lb)
6 mm
Remove the seatpost from the bicycle work stand.
10
Apply friction paste to the outside of the seatpost.
Install the seatpost and pull the hose through the frame.
⚠ WARNI NG
Failure to use friction paste could allow the seatpost to slip during use,
which could lead to serious injury and/or death.
Reverb™ Stealth Hose Removal and Installation
15