Configuring None Authentication For Modem Login - HP A7500 Series Configuration Manual

Configuring none authentication for modem login

Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see "Configuration
Configuration procedure
Follow these steps to configure none authentication for modem login:
To do...
Enter system view
Enter one or more AUX user
interface views
Specify the none authentication
mode
Configure common settings for
modem login
After the configuration, when you log in to the device through modems, you are prompted to press Enter.
A prompt such as <HP> appears after you press Enter, as shown in
Figure 24 Configuration page
requirements."
Use the command...
system-view
user-interface aux first-number
[ last-number ]
authentication-mode none
—
55
Remarks
—
—
Required
By default, users that log in through
the console port are not
authenticated.
Optional
See "Configuring common settings
for modem login (optional)."
Figure 24.