Configuration procedure
Follow these steps to change the system time:
To do...
Set the system time and date
Enter system view
Set the time zone
Set a daylight saving time scheme
Enabling displaying the copyright statement
The switch by default displays the copyright statement when a Telnet or SSH user logs in, or when a
console user quits user view. You can disable or enable the function as needed. The following is a sample
copyright statement:
******************************************************************************
* Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
Follow these steps to enable displaying the copyright statement:
To do...
Enter system view
Enable displaying the copyright
statement
Configuring banners
Introduction to banners
Banners are greeting or alert messages that the system displays during the login process of a user.
Use the command...
clock datetime time date
system-view
clock timezone zone-name { add |
minus } zone-offset
Set a non-recurring scheme:
clock summer-time zone-name
one-off start-time start-date
end-time end-date add-time
Set a recurring scheme:
clock summer-time zone-name
repeating start-time start-date
end-time end-date add-time
Use the command...
system-view
copyright-info enable
153
Remarks
Optional
Available in user view.
—
Optional
Universal time coordinated (UTC)
time zone by default.
Optional
Use either command.
By default, daylight saving time is
disabled, and the UTC time zone
applies.
Remarks
—
Optional
Enabled by default.
*
*
*