Figure 26 Configuration page
Configuring common settings for modem login (optional)
Follow these steps to configure common settings for modem login:
To do...
Enter system view
Enable display of copyright
information
Enter one or more AUX user
interface views
Configure
console port
properties
Use the command...
system-view
copyright-info enable
user-interface aux first-number
[ last-number ]
Configure the
speed speed-value
baud rate
Configure the
parity { even | mark | none | odd
parity check mode
| space }
60
Remarks
—
Optional
Enabled by default.
—
Optional
By default ,the baud rate is 9600
bps.
Transmission rate is the number of
bits that the device transmits to the
terminal per second.
Optional
By default, the parity check mode of
the AUX port is set to none, which
means no check bit.