Displaying And Maintaining The Tftp Client; Tftp Client Configuration Example (For Standalone Mode) - HP A7500 Series Configuration Manual

To do...
Use an ACL to control the device's
access to TFTP servers
Specify the source IP address of
sent TFTP packets
Return to user view
Download or upload a file in an
IPv4 network
Download or upload a file in an
IPv6 network
NOTE:
If there is not primary IP address configured on the source interface, no TFTP connection can be
established.
If you use the tftp client source command to configure a source interface and then use it to configure a
source IP address, the source IP address overwrites the source interface, and vice versa.

Displaying and maintaining the TFTP client

To do...
Display the source IP address
configuration of the TFTP client
TFTP client configuration example (for standalone
mode)
Network requirements
• As shown in
addresses are 1.2.1.1/16 and 1.1.1.1/16 respectively. The device and PC can reach each other.
The device downloads a system software image file from the PC for upgrading and uploads a
•
configuration file named config.cfg to the PC for backup.
Use the command...
tftp-server [ ipv6 ] acl acl-number
tftp client source { interface
interface-type interface-number | ip
source-ip-address }
quit
tftp server-address { get | put | sget }
source-filename
[ destination-filename ] [ vpn-instance
vpn-instance-name ] [ source
{ interface interface-type
interface-number | ip
source-ip-address } ]
tftp ipv6 tftp-ipv6-server [ -i
interface-type interface-number ] { get
| put } source-filename
[ destination-filename ] [ vpn-instance
vpn-instance-name ]
Use the command...
display tftp client configuration [ |
{ begin | exclude | include }
regular-expression ]
Figure 38, use a PC as the TFTP server and the device as the TFTP client. Their IP
91
Remarks
Optional
By default, no ACL is used to
control the device's access to
TFTP servers.
Optional
By default, the source IP address
is determined by the route from
the TFTP client to the TFTP server.
—
Optional
Available in user view
Optional
Available in user view
Remarks
Available in any view