HP A7500 Series Configuration Manual page 101

This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 1
slot 0!
<Sysname> boot-loader file chassis1#slot1#flash:/newest.app chassis 1 slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 1
slot 1!
<Sysname> boot-loader file chassis2#slot0#flash:/newest.app chassis 2 slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 2
slot 0!
<Sysname> boot-loader file chassis2#slot1#flash:/newest.app chassis 2 slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 2
slot 1!
# Reboot the IRF fabric and the software is upgraded.
<Sysname> reboot
NOTE:
If the free memory space of the master and slave devices is not big enough, use the fixdisk command to
clear the memory or use the delete/unreserved
downloading new files.
The system software image file used for the next startup must be saved in the storage medium's root
directory. You can copy or move a file to the root directory of the storage medium. For more information
about the boot-loader command, see
file url
- command to delete the files not in use before
Fundamentals Command Reference
94
.