Figure 48 Network diagram of hotfix configuration
TFTP client
1.1.1.1/24
Device
Configuration procedure
Configure FTP Server. The configuration varies depending on server type and the configuration
1.
procedure is omitted.
•
Enable the TFTP server function.
Save the patch files patch_mpu.bin, patch_lpu.bin, and patch_lpo.bin to the directory of the TFTP
•
server.
Configure the device.
2.
CAUTION:
Make sure the free Flash space of the device is large enough to store the patch files.
# Before upgrading the software, use the save command to save the current system configuration.
(Details not shown)
# Load the patch files patch_mpu.bin, patch_lpu.bin, and patch_lpo.bin from the TFTP server to the
active MPU.
<Device> tftp 2.2.2.2 get patch_mpu.bin
<Device> tftp 2.2.2.2 get patch_lpu.bin
<Device> tftp 2.2.2.2 get patch_lpo.bin
# Copy the patch files to the root directory of the standby MPU in slot 1.
<Device> copy patch_mpu.bin slot1#flash:/
# Install the patches.
<Device> system-view
[Device] patch install flash:
Patches will be installed. Continue? [Y/N]:y
Do you want to continue running patches after reboot? [Y/N]:y
Installing patches........
2.2.2.2/24
Internet
128
TFTP server