Configuration procedure
Follow these steps to enable LPU forwarding proxy:
To do...
Enter system view
Enable LPU forwarding proxy
Enabling the port-down function globally
The port-down function shuts down all network ports of a standalone switch or an IRF member switch
immediately after all its MPUs are unplugged or reboot abnormally. This function does not work as long
as the switch has an active MPU.
Follow these steps to enable the port-down function globally:
To do...
Enter system view
Enable the port-down function
globally
Enabling data recovery for the extended memory
on a card
You can enable data recovery for the expansion memory on an LSQ1SRP1CB MPU to recover corrupted
data.
Follow these steps to enable data recovery for the extended memory on a card:
To do...
Enter system view
Enable data recovery for the
extended memory on a card
Use the command...
system-view
In standalone mode:
switch-mode optional-proxy-board
In IRF mode:
switch-mode optional-proxy-board
chassis chassis-number
Use the command...
system-view
monitor handshake-timeout
disable-port
Use the command...
system-view
In standalone mode:
mmu-monitor enable slot
slot-number
In IRF mode:
mmu-monitor enable chassis
chassis-number slot slot-number
166
Remarks
—
Required
By default, LPU forwarding
proxy is disabled.
Remarks
—
Required
The function is disabled by
default.
Remarks
—
Optional
Enabled by default.