About This Document; Function Of This Document; Scope Of Application; Target Groups / Qualification Requirements - SICK GM32 EX Installation Operation & Maintenance

1

About this document

1.1

Function of this document

1.2

Scope of application

1.3

Target groups / qualification requirements

Table 1: Qualification requirements
Tasks
Assembly
Electrical installation
Initial start-up
Returning to operation
Decommissioning
Operation
Maintenance
Troubleshooting
1.4

Further information

1.5

Data integrity

8015594/YV18/V1-8/2017-08 | SICK
Subject to change without notice
These Operating Instructions describe:
• Device components
• Installation
• Operation
• Maintenance work required for reliable operation
These Operating Instructions are only valid for the in-situ gas analyzer with the designa‐
tion GM32 Ex Cross-Duct.
They are not valid for other in-situ gas analyzers from SICK.
User groups
Operator / system integrator
Qualified personnel
Authorized operator Ü
• Operator / system integrator
•
Authorized operator Ü
•
Operating Instructions of the purge air supply
• Final inspection record
• CD-ROM with SOPAS ET
• Optional: Technical information
• Optional: Operating Instructions Modular System I/O
3G / Zone 2
• FS850S Pressurized Enclosure Manual
• Manual, Purge medium valve SVD.L.2.-AI00
NOTE
Observe all supplied documents.
b
SICK AG uses standardized data interfaces such as, for example, standard IP technol‐
ogy, in its products. The focus here is on product availability and features.
ABOUT THIS DOCUMENT
Qualification
e.g. plant operator, unskilled in measurement
technology
Authorized electrician (authorized skilled electri‐
cian or person with similar training)
General knowledge in measurement technology,
specialist device knowledge (possibly customer
training at SICK)
• e.g. plant operator, unskilled in measure‐
ment technology
• Authorized electrician (authorized skilled
electrician or person with similar training)
O P E R A T I N G I N S T R U C T I O N S | GM32 Ex
1
7