WAGNER Cobra 40-10 Operating Manual page 36

Cobra.
EDITION 01/2012 PART NUMBER DOC322851
OPERATING MANUAL
Bleeding
Procedure
1. Place the pump on the head and unscrew threaded plug (5).
2. Slowly start up the pump and check the oil suction nipple until no more air-bubbles
withdraw.
3. The oil level A in the oil reservoir has to be within the specifi ed limit values.
4. Screw in threaded plug (5) and tighten with 3-4 Nm; 2.2-3 lbft.
5. Mount piston cover (1), cap with air-outlet and shuttering pressure stage.
6. The pump is ready for operation.
A
5
B_01224
36