WAGNER Cobra 40-10 Operating Manual page 35

EDITION 01/2012
OPERATING MANUAL
Environmental pollution by waste oil!
Waste oil in the duct system or buried in the soil leads to heavy
environmental damage
Groundwater contamination is punishable
SIHI_0109_GB
Filling hydraulic stage with oil
Procedure
1. Place pump (mounted on the base frame) on the head.
2. Unscrew threaded plug (5)
3. Unscrew 2 threaded plugs (4) and replace it through the fi ttings straight (6) from the
oil fi lling kit.
4. Connect hoses with Y- pieces (7).
5. Filling the catheter-shot (8) with 80 ml; 4.88 cu inch hydraulic oil and connect it with
the hose.
6. Drive piston (9) into front end position. Filling oil with catheter-shot (8) into oil bowl
(3) until oil fl ows out of the oil suction nipple free of blow holes.
7. Drive piston (9) into rear end position. Filling oil with catheter-shot (8) into oil bowl (3)
until oil fl ows out of the oil suction nipple free of blow holes.
8. Refi ll oil approx. 19 mm; 0.75 inch up to oil level A (oil level before exhaust).
9. Screw in threaded plug (5) and tighten lightly. Put pump on the side and remove oil
fi lling kit. Screw in 2 threaded plugs (4) with seals and tighten.
B_01236
7
8
PART NUMBER DOC322851
Collect waste oil and return it at punblic collecting point .
Waste oil is taken back with the purchase of hydraulic oil by the
salesman .
5
9
6
4
CAUTION
Cobra.
B_01240
35