Spare Parts; How To Order Spare Parts - WAGNER Cobra 40-10 Operating Manual

EDITION 01/2012
OPERATING MANUAL
8

SPARE PARTS

8.1

HOW TO ORDER SPARE PARTS?

Always supply the following information to ensure delivery of the right spare part:
Part Number, description and quantity
The quantity need not be the same as the number given in the „Quantity" column.
This number merely indicates how many of the respective parts are used in each sub
assembly.
The following information is also required to ensure smooth processing of your order:
- Address for the invoice
- Address for delivery
- Name of the person to be contacted in the event of any queries
- Type of delivery required (air freight or mail, sea route or overland route, etc.)
Marks in spare parts lists
Note to column „K" in the following spare parts lists.
= Wearing parts
Note: No liability is assumed for wearing parts
= Not part of standard equipment, available, however, as additional extra.
Incorrect maintenance/repair!
Risk of injury and damage to the equipment
SIHI_0004_GB
PART NUMBER DOC322851
Repairs and part replacement may only be carried out by specially
trained staff or a WAGNER service center.
Before all work on the unit and in the event of work interruptions:
- Switch off the energy/compressed air supply.
- Relieve the pressure from the spray gun and unit.
- Secure the spray gun against actuation.
Observe the operating and service instructions when carrying
out all work.
WARNING
Cobra.
43