WAGNER Cobra 40-10 Operating Manual page 19

EDITION 01/2012
OPERATING MANUAL
Overpressure!
Risk of injury from bursting components
SIHI_0026_GB
Material pump (9)
The material pump has been designed as a double diaphragm pump with exchangeable
inlet valves and outlet valves. Change between spraying mode and circulation mode with
the return valve (7).
Set-up
The Cobra pump may only be operated in horizontal set-
up or in vertical set-up as shown in pictures. Over head
operating is not permitted.
B_01205
Vertical set-up
Over-head operating or storage ( Air motor with pressure regulator downstairs )
Air could get into the hydraulic oil circuit which would lead to malfunction
Avoid over-head operating or over-head storage.
Deaerate, see service instructions.
SIHI_0071_GB
PART NUMBER DOC322851
Never change the safety valve setting.
Horizontal set-up
CAUTION
WARNING
Cobra.
B_01207
Over-head set-up
19