Microphone/Front Panel; Microphone - Toshiba Satellite R10 Maintenance Manual

4.22 Microphone / Front panel
4.22 Microphone / Front panel

4.22.1 Microphone

Removing the microphone
The following describes the procedure for removing the speaker. (See Figure 4-33.)
1. Remove the following screws securing the both right and left mic holder.
M2.0x4.0B
2. Pull up the mic holder straight and remove the mic holder from the cover
assembly.
3. Remove the microphone from the slot of cover assembly.
M2.0x4.0B FLAT BIND
Mic holder (L)
Removing the microphone
The following describes the procedure for removing the speaker. (See Figure 4-33.)
1. Fitting the microphone to the shapes of slot, install the microphone to the cover
assembly.
Install the mic holder to the cover assembly while fitting it to the slit of cover assembly
and secure them with the following screws.
M2.0x4.0B
4-48
FLAT BIND screw
Microphone
Figure 4-33 Removing the microphone
FLAT BIND screw
4 Replacement Procedures
x2 (x1 for each side)
Mic holder (R)
x2 (x1 for each side)
Satellite R10 Maintenance Manual (960-509)