H/W(Hardware) Initial Information Setting Tool; Heatrun Test Program - Toshiba QOSMIO G10 Maintenance Manual

3 Tests and Diagnostics
3.1.2 H/W (Hardware) initial information setting tool
The H/W initial information setting tool consists of the following programs.
Initial configuration
Region write
System configuration display
E2PROM test (MAC/GUID/DMI)
You will need the following equipment to perform some of the programs.
The Diagnostics Disk (Main T&D)
A LAN wraparound connector (E2PROM test)

3.1.3 Heatrun test program

The heatrun test starts automatically after the selection.
You will need the following equipment to perform this program.
The Diagnostics Disk (Main T&D)
QOSMIO G10 Maintenance Manual (960-497)
3.1 The Diagnostic Test
3-3