■ Procedures Prior to Operation
1.Switching On
After ensuring that it is safe to do so, switch on the transmitter followed
by the receiver or Mini-Z.
2.Model Confirmation
Confirm the model which will be used.
3.Checking Movements
With the model's wheels lifted off the ground, operate transmitter to check
for proper movement. While driving, use steering and throttle trims to make
fine adjustments. Drive in a figure 8 pattern to check steering balance.
Figure 8 Pattern
Stand
Trim
4.Switching Off
After a driving session, switch off the receiver (or Mini-Z), followed by the
transmitter. Remove the battery pack from the model.
After switching off, wait at least 5 seconds before switching on again to ensure proper operation.
14