Ahur; Altern; Bsignal - Simplex 4010 Applications Manual

Point Types,

AHUR

ALTERN

BSIGNAL

Technical Manuals Online! - http://www.tech-man.com
Continued
AHU on/off relay – single relay control. This point type is used with
applications in which a single relay performs AHU ON and OFF control. Points
assigned with this type operate on general alarm (that is, when any point within
L1 "General Alarm List" goes into alarm). Point turns OFF on Reset.
Circuit Status
ON
OFF
Disabled TBL
OFF AUTO TBL
Elevator capture – alternate. Used for a relay connected to the elevator controls
to provide alternate floor elevator recall. This relay turns ON when any of the
points in L5, Alternate Elevator Recall Zones, goes into alarm. Points with this
type turn OFF when the system is reset.
Circuit Status
ON
OFF
Disabled TBL
OFF AUTO TBL
Trouble/supervisory "bell" signal. Used when an audible signal should activate
on any supervisory or trouble condition and remain ON until the condition has
been acknowledged or cleared.
Circuit Status
ON
OFF
Disable TBL
OFF AUTO TBL
LCD Display
AHU Relay
AHU Relay
AHU Relay
AHU Relay
AHU Relay
LCD Display
ALT Elevator Recall
ALT Elevator Recall
ALT Elevator Recall
ALT Elevator Recall
ALT Elevator Recall
LCD Display
Trouble Signal
Trouble Signal
Trouble Signal
Trouble Signal
Trouble Signal
A-5
System Status
ON
OFF
CODING
TROUBLE
TROUBLE
System Status
ON
OFF
CODING
TROUBLE
TROUBLE
System Status
ON
OFF
CODING
TROUBLE
TROUBLE
Continued on next page