Chapter 2. Selective Signaling Applications; Overview; In This Chapter - Simplex 4010 Applications Manual

Overview

In this Chapter

Technical Manuals Online! - http://www.tech-man.com
Chapter 2
Selective Signaling Applications
Selective signaling replaces the system's general alarm NAC operation – which
activates all NACs in response to any alarm condition – with selective NAC
control. This type of control allows you to program the system so that only
specific NACs respond to specific initiating devices.
Refer to the following page for specific information on a topic.
Selective Signaling by Floor
Selective Signaling by Area
Selective Signaling by Fire Floor, Floor Above, and
Floor Below
Selective Bypass of NAC/Relay Circuits
Selective Activation of Single Station Devices
Topic
2-1
See Page #
2-2
2-7
2-12
2-17
2-21