Chapter 3. Suppression Release; Overview; In This Chapter - Simplex 4010 Applications Manual

Overview

In this Chapter

Technical Manuals Online! - http://www.tech-man.com
Chapter 3
Suppression Release
This chapter describes the 4010 programming required for common
suppression-release applications.
Basic applications, which do not involve pre-signaling or an abort switch with
delay, can be programmed without Custom Control using a mix of the 4010's
built-in system options, point types, and lists. More complex applications,
involving pre-signaling or an abort switch with delay, require Custom Control
programming.
Before continuing, make sure that you have the following information:
•
Fire Alarm STRM Ref. number SEB-FAS0899-01. This STRM contains
critical information concerning UL, FM, and IRI suppression requirements.
•
Field Wiring Diagram 842-058.
•
Field Wiring Diagram 842-073.
•
Detailed knowledge concerning AHJ requirements .
Refer to the following page for specific information on a topic.
Default Suppression Release Applications
Dual Detector, Pre-Signal, and Abort Switch with
No Delay
Dual Detector, Pre-Signal, and Abort Switch with
Delay
3-1
Topic See Page #
3-2
3-5
3-8