Sas Disk Drive Leds - HP Integrity BL860C i4 User's & Service Manual

Item
4
5
6
7
8
9
10
1
If the Onboard Administrator denies power to the server blade, the server blade returns to Standby mode.

SAS disk drive LEDs

The BL860c i4 Sever Blade may have up to 2 hard disk drives installed. Each drive has two LEDs which
display the drive status.
Item
1
2
Description
NICs 1, 2, 3, 4
Monarch power button / Monarch
power LED
SUV connector
Physical Presence Button
Partition Identifier
Blade power LED
iLO 3 Heartbeat (behind grill)
Description
Fault/UID LED (amber/blue)
Online LED (green)
Status
Green = Network linked
Green flashing = Network activity
Off = No link or activity
Green = Blade is acting as
Monarch and is powered on
Amber = Blade is acting as
Monarch and is in standby
Off = Blade is not Monarch
N/A
N/A
Green = Blade is in a partition
Off = Blade is not in a partition
Green = Server blade is powered
on
Amber = standby (auxiliary
1
power available)
Off = Off
Green flashing = iLO 3 Active
Amber flashing = iLO 3 failure
Off = no standby voltage
SAS disk drive LEDs 95