Drive Paths In Uefi - HP Integrity BL860C i4 User's & Service Manual

UEFI Shell Command
ping
reconnect
reset
rm
salproc
secconfig
sermode
set
setsize
shift
smbiosview
stall
tapeboot
tftp
time
timezone
touch
type
unload
ver
vol
xchar

Drive paths in UEFI

Devices in the server blade are represented by device paths in the UEFI shell. Each internal SAS drive
could be configured either as:
• RAID mode
• HBA (raw) mode
Definition
Ping a target machine with UEFI network stack
Reconnects one or more UEFI drivers to a device
Resets the system
Deletes one or more files or directories
Make a SAL procedure call
View/configure system security features
Sets serial port attributes
Displays or modifies UEFI Shell environment variables
Set the size of a file
Shifts batch file input parameter positions
Displays SMBIOS information
Stalls the processor for the specified number of microseconds
Boot from tape
Perform TFTP operation
Displays or changes the current system time
Displays or sets time zone information
Updates filename timestamp with current system date and time
Displays file contents
Unloads a UEFI driver
Displays UEFI Firmware version information
Displays or changes a file system volume label
Turn on/off extended character features
Drive paths in UEFI 145