Front panel LEDs
1
Power button
2
CAUTION:
not designed to provide a permanent connection.
Front Panel LEDs and Controls
The server blade contains seven LEDs on the front panel that indicate the server status. The front
panel also contains the power button, the SUV port, and pinhole controls.
Figure 5
shows the locations of the front panel LEDs and controls.
Figure 5 Front Panel LEDs and controls on the BL870c Server Blade
UID LED
1
Server health LED
2
Internal health LED
3
NIC 1 LED
4
For more information regarding the front panel LEDs, see
SAS Disk Drive LEDs and Controls
There are four SAS disk drives on the BL870c server blade. They have identical LEDs that show
the drive status.
For locations of the SAS disk drive LEDs, see
3
4
Disconnect the local I/O cable from the I/O port when not in use. The connector is
5
6
7
8
Blade extraction handle
release button
Blade extraction handle
NIC 2 LED
NIC 3 LED
NIC 4 LED
SUV cable port
"Front Panel LEDs" (page
Figure
6.
Server blade information
5
label
Init (ToC) pinhole button
9
iLO 2 MP reset pinhole
10
button
Power button
1 1
94).
Controls, Ports, and LEDs
21