Determining Your Current Firmware Revisions - HP Integrity BL860C i4 User's & Service Manual

Product Name(s)
HPE Integrity BL860c i4 Server
Blade
HPE Integrity BL870c i4 Server
Blade
HPE Integrity BL890c i4 Server
Blade
HPE BladeSystem Onboard
Administrator
HPE BladeSystem c-Class
Virtual Connect

Determining your current firmware revisions

Server blade
IMPORTANT:
It is possible to access the iLO TUI before iLO has completed its initialization at power up. The
indicator to know that iLO has completed initialization is the ability to access the nPartitions
command via the TUI.
Procedure
1. Log into the system iLO 3 MP.
2. From the Main Menu, enter the cm command to access the Command Menu.
3. Enter the sr command to view the system FW revisions.
Hewlett-Packard Integrated Lights-Out 3 for Integrity
(C) Copyright 1999-2010 Hewlett-Packard Development Company, L.P.
*************************************************************************
A default MP user Administrator/Admin is currently configured
and remote access is enabled. Modify the default password or
delete the default user (see UC command)
*************************************************************************
MP MAIN MENU:
62 Optional components
Minimum Firmware Version
T42.02
3.55
3.70
IMPORTANT:
VCSU version 1.7.0 must
be used to update to VC
3.70.
MP Host Name: ilo002264fee2de
iLO MP Firmware Revision 01.41.01
MP ACCESS IS NOT SECURE
Disable all types of remote access (see SA command)
Minimum Firmware Location
Go to http://www.hpe.com —>
Support & Drivers —> enter
product name —> select
operating system —> "Cross
operating system"
Go to http://www.hpe.com —>
Support & Drivers —> enter
product name
Go to http://www.hpe.com —>
Support & Drivers —> enter
Interconnect Module product
name
OR