Troubleshooting Processors; Processor Installation Order; Processor Module Behaviors; Enclosure Information - HP Integrity BL860C i4 User's & Service Manual

5 ILO
4 ILO
FW_UPDATE_SIG_OVERRIDE
3 ILO
2 ILO
4. Select a, then a threshold filter number to filter events to desired level.
MP:SL (+,-,<CR>,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to
Quit) >a
Alert Level Threshold Filter:
1 : Major Forward Progress
2 : Informational
3 : Warning
5 : Critical
7 : Fatal
Enter alert level threshold or [Q] to quit filter setup: 3
-> Alert threshold level 3 filter will be applied.
5. To decode the blinking state of a blade server LED, review the entire SEL and look at events with alert
level 2 and above.

Troubleshooting processors

Processor installation order

For a minimally loaded server blade, one processor must be installed in processor slot 0. Install a
processor of the same version into processor slot 1 (if purchased). See CPU and heatsink module on
page 123 for more information on processor installation.

Processor module behaviors

All physical processors become functional after server power is applied.
Corrected errors and uncorrected errors in any physical processor core can cause a local MCA event,
which can have one of the following consequences:
• Can cause the entire system to crash.
• The failure is corrected and the processor is restarted.
• The failure is corrected, but the processor which experiences excessive correctable errors is marked
for deconfiguration.

Enclosure information

This installation document covers only the BL860c i4, BL870c i4, and BL890c i4 server blades, and does
not include any specific server blade enclosure information. For server blade enclosure information, go to:
• http://www.hpe.com/support/Bladesystem_c3000_Enclosures_Manuals
• http://www.hpe.com/support/Bladesystem_c7000_Enclosures_Manuals

Cooling subsystem

The server blade does not contain any fans. Cooling is handled by the enclosure.
106 Troubleshooting processors
1 2 4080231200E10008 0000000000000000 FW_UPDATE_SUCCESS
1 2 4080236800E10006 0000000000000000
1 2 4080230D00E10004 0000000000000000 FW_UPDATE_START
1 2 408022E200E10002 0000000000000000 ENTER_MFG_MODE
07 Jan 2010 22:40:43
07 Jan 2010 22:33:05
07 Jan 2010 22:31:23