Storage And Media Devices; Sas Disk Drive Leds; Hot-Pluggable Sas Drive Leds - HP Integrity rx2660 User's & Service Manual

NOTE: The System Insight Display is the same for the Data Center server and the Office Friendly
server. However, the Office Friendly server only uses the bottom row of fan LEDs since there
are only six fans for the Office Friendly server.

Storage and Media Devices

The server contains up to eight hot-pluggable SAS disk drives and one DVD or DVD+RW drive.
Storage and media devices have LEDs that indicate activity and device status.

SAS Disk Drive LEDs

The SAS hard drives have two LEDs per drive, as described below. See
Drive Activity LED
Drive Status LED
Figure 1-8 shows the SAS disk drive LEDs.
Figure 1-8 Hot-Pluggable SAS Drive LEDs
Drive activity LED
1
Table 1-3 lists the SAS disk drive LEDs and states
Table 1-3 SAS Disk Drive LEDs
Activity LED
Off
Solid green
Flickering green
Off
30 Overview
The drive activity LED is solid green during normal operation and
flickers when a drive is accessed.
The drive status LED is bi-color and can display amber or blue.
Amber indicates a warning, or failure condition. Blue is a locator
LED that identifies a particular disk drive. The locator LED is
activated through various software utilities, such as online
diagnostics and SAS disk drive configuration tools.
Drive status LED
2
Status LED
Off
Off
Off
Flashing amber at 1 Hz
(Figure 1-8).
SAS Disk Drive State
Offline or not configured
Normal operation; no activity
Normal operation; disk read or write activity
Offline, no activity; predictive failure
Figure 1-8: