Instruction Manual - Toshiba TOSVERT VF-nC3 Instruction Manual

1.4.4 Installation
 Installation environment
The VF-nC3 Inverter is an electronic control instrument. Take full consideration to installing it in the proper
operating environment.
 Do not place any inflammable substances near the VF-nC3 Inverter.
If an accident occurs in which flame is emitted, this could lead to fire.
 Do not install in any location where the inverter could come into contact with water or other fluids.
Prohibited
This can result in electric shock or fire.
 Operate under the environmental conditions prescribed in the instruction manual.
Operations under any other conditions may result in malfunction.
Mandatory
action
 Do not install the VF-nC3 Inverter in any location subject to large amounts of vibration.
This could cause the unit to fall, resulting in bodily injury.
Prohibited
 Check to make sure that the input power voltage is +10%, -15% of the rated power voltage written on
the rating label (10% when the load is 100% in continuous operation) If the input power voltage is not
+10%, -15% of the rated power voltage (10% when the load is 100% in continuous operation) this
Mandatory
may result in fire.
action
Warning
Caution
A-19
E6581595
1