Setting A Parameter Using The Guidance Function - Toshiba TOSVERT VF-nC3 Instruction Manual

Note: The following parameters are not displayed in this auh, even if they are the most recent changes.
5.2

Setting a parameter using the guidance function

()
 : Guidance function
5
Guidance function ():
The guidance function refers to the special function of calling up only functions necessary to set up the inverter in
response to the user's needs. When a purpose-specific guidance is selected, a group of parameters needed for the
specified application (function) is formed and the inverter is switched automatically to the mode of setting the group
of parameters selected. You can set up the inverter easily by simply setting the parameters in the group one after
another. The guidance function () provides four purpose-specific guidance.
[Parameter setting]
Title

Note: 1 is for manufacturer's settings. Do not change the settings.
Parameter
display
MODE


MODE


MODE


 (Operation frequency of operation panel),  (Guidance function),  (Automatic
acceleration/deceleration),  (Torque boost setting macro function),  (Default setting), 
(Checking the region setting),  (Prohibition of change of parameter settings)
Function
Guidance function
Press the MODE key to return to the parameter setting mode
"."
After that you can press the MODE key to return to the status
monitor mode or the standard monitor mode (display of output
frequency).
Adjustment range
0: -
1: - Note 1
2: Preset speed guidance
3: Analog signal operation guidance
4: Motor 1/2 switching operation guidance
5: Motor constant setting guidance
E-2
E6581595
Default setting
0