Anonymous Call; Do Not Disturb (Dnd); Call Return; Call Hold - NetCommWireless NF18ACV User Manual

Anonymous call

Anonymous call does not send the caller ID to the remote party. This is useful if you do not want others know who you are.
Check with your VoIP Provider if your service supports hidden caller ID.
1 Enable Anonymous calling in the Voice--SIP Advanced Setting web page.
2 Pick up the receiver on the phone.
3 Dial *68 to enable anonymous call.
4 Hook on the receiver, and dial another extension as you like. Now your caller ID information is blocked.

Do Not Disturb (DND)

If DND is enabled, all incoming calls are rejected. DND is useful if you do not want others to disturb you. Check with your VoIP
Provider if your service supports DND.
1 Enable DND in the Voice--SIP Advanced Setting web page.
2 Pick up the receiver on the phone.
3 Dial *78 to enable DND.
4 Hook on the phone. Now your phone rejects all incoming calls.
5 Hook off again to disable the DND.

Call Return

For incoming calls, the DSL router remembers the number of calling party. Check with your VoIP Provider if your service
supports Call returns. You cannot call return, if the caller has hidden caller ID.
1 Enable Call Return in the Voice--SIP Advanced Setting web page.
2 Press *69 to return a call.
3 Now you can make the call as if you have dialled the whole number.

Call Hold

Call hold enable you to put a call to a pending state, and pick it up in future. Check with your VoIP Provider if your service
supports Call Hold.
1 Assuming you are in a voice connection, you can press FLASH to hold current call.
2 Now you can call another party, or press FLASH again to return to first call.

Call Waiting

Call waiting allows third party to call in when you are in a voice connection. Check with your VoIP Provider if your service
supports Call Waiting.
96 of 131
© NetComm Wireless 2017
User Guide