Sip Basic Setting; Figure 102 - Sip Basic Settings Page - NetCommWireless NF18ACV User Manual

SIP Basic Setting

The SIP Settings page is where you enter your VoIP service settings as supplied by your VOIP service provider (VSP). If you are
unsure about a specific setting or have not been supplied information for a particular field, please contact your VoIP service
provider to verify if this setting is needed or not.
The individual fields shown above on the SIP Basic Settings page are explained in the following table.
Option
Bound Interface Name
SIP Local Port
86 of 131
© NetComm Wireless 2017
Figure 102 – SIP Basic Settings page
Select the Interface that the VoIP account will use to make a connection to
the VoIP Service Provider.
Set the SIP local port of the gateway, the default value is 5060. SIP local
port is the SIP UA (user agent) port.
Definition
User Guide